FMM Heavy Fencing system consists of 2.5mpanels with 4mm horizontal wires 6mm vertical wire with 3 decorative profiles along the horizontal. The panels are hot dip galvanised followed by a dark green powder coating. The support posts are 3.0m high for the 8ft system, .8m to be concreted in the ground. All posts come with holes pre drilled and tapped to accommodate an 8mm screw. The Posts come with brackets attached by screws which are tightened with an Allen key. The clips grab both panels in one go and there is no need for a bracing wire at the top or bottom of the panel. This leads to a very quick installation. Corner posts are available with fixing holes on 2 sides.
The security fencing panels are from stock ready for dispatch. Each fencing panel comes with a single post, hence an extra end post is required to finish a run.
We can make double gates up to 5m in width and single gates up to 2.5m in width. Every gate is custom made so the lead time on these is 3 weeks. Please call us for pricing the gates.
The photo is for reference purposes only. All gates have 100mm support posts and 60mm box section framework for the gate leaves.
The Frame is galvanised and then green powder coated.
A standard pedestrian single gate has an opening of 1-2.5m
A double gate is 2m-5m in width.
They accept a padlock